In the storm seasons, there will be a lot of rain and also the thunders and lightning storms. Because of this, there is a need that the houses are protected from the strikes. This will be through the grounding kits. The rods are installed on the roof and take in the power and drive it deep not the ground. This protects the house from the impact. Read more to know more about the grounding rod.
When there is a storm, lightning is a high possibility. With this being the case, then you should know that a tall building is under threat. With no rod, the house can get electrocuted with anyone who is within range. This may cause serious injuries or even deaths. This means that for all the tall buildings need the grounding and lightning rods.
Well, you may also be one wondering what the rod is. The rod is metal and is mounted on to the roof of a building. These rods come in different sizes and also shapes. Some are blunt whereas some are sharp. Most people will make use of the sharp rods since they believe are more effective. On the other scope, the rod catches the power and drives it to the ground in the safest manner possible.
With this fact, then you need to know how it actually works, well, in the first place, there is the metal rod, the wire and the grounding bar absorber. When the rod is struck, the power is conducted through the wire down to the grounding bar that absorbs the electricity. The earth drives the power into the ground causing no damages.
Always make sure that you conduct a follow-up. What is a flow up in case of a lightning strike? Well, if you have a rod installed, there is always the option of doing an after the survey of the impact. The strike can damage the building in several ways. In this case, if you suspect that there has been a strike. Make sure that you make a point and access the damage.
There are also buildings that are very sophisticated and any given strike can cause immense damage to the structures. Well, in such case, you will find that there will be several rods on the roof. They will be placed all over the roof. Also, they will use connectors to connect them to one single conductor. In the case of a strike, then the power will be taken up by the bar and driven into the ground in the fastest way possible.
The usage of these rods will date back into the early 18th century. All this came from the discovery made by Franklin. He discovered the electricity and the rods themselves. He used them to harvest the energy from the strike. This made them common over the while.
Finally, you will realise that most people will use the bar some for beauty and other for precautionary measure.
When there is a storm, lightning is a high possibility. With this being the case, then you should know that a tall building is under threat. With no rod, the house can get electrocuted with anyone who is within range. This may cause serious injuries or even deaths. This means that for all the tall buildings need the grounding and lightning rods.
Well, you may also be one wondering what the rod is. The rod is metal and is mounted on to the roof of a building. These rods come in different sizes and also shapes. Some are blunt whereas some are sharp. Most people will make use of the sharp rods since they believe are more effective. On the other scope, the rod catches the power and drives it to the ground in the safest manner possible.
With this fact, then you need to know how it actually works, well, in the first place, there is the metal rod, the wire and the grounding bar absorber. When the rod is struck, the power is conducted through the wire down to the grounding bar that absorbs the electricity. The earth drives the power into the ground causing no damages.
Always make sure that you conduct a follow-up. What is a flow up in case of a lightning strike? Well, if you have a rod installed, there is always the option of doing an after the survey of the impact. The strike can damage the building in several ways. In this case, if you suspect that there has been a strike. Make sure that you make a point and access the damage.
There are also buildings that are very sophisticated and any given strike can cause immense damage to the structures. Well, in such case, you will find that there will be several rods on the roof. They will be placed all over the roof. Also, they will use connectors to connect them to one single conductor. In the case of a strike, then the power will be taken up by the bar and driven into the ground in the fastest way possible.
The usage of these rods will date back into the early 18th century. All this came from the discovery made by Franklin. He discovered the electricity and the rods themselves. He used them to harvest the energy from the strike. This made them common over the while.
Finally, you will realise that most people will use the bar some for beauty and other for precautionary measure.
About the Author:
When you are looking for information about a grounding rod, come to our web pages online today. More details are available at http://www.rossengineeringcorp.com now.
No comments:
Post a Comment